STIC-ADHESIVE Products Co.

Mil-Spec Coatings

Most of our specialty coating products have been pre-tested, approved, and listed in the Qualified Product Database (QPD) by a US Government agency or department for government procurement. STIC-ADHESIVE has been a proud supplier of military spec (milspec or mil spec) products for over 25 years. CAGE code is 1BH90.

We sell our mil-spec coatings directly at www.MilSpecCoating.com.

Specs listed below are our most popular. Ask us if you need something special or different.

• MIL-DTL-24441
• MIL-PRF-24635
• MIL-DTL-24607
• TPD-1000A
• TT-P-645

MIL-DTL-24441D(SH) PAINT, EPOXY-POLYAMIDE (Epoxy paint)

Dated August 27, 2009. QPD/QPL-24441-43 August 20, 2008

The 24441 specification covers a series of two component epoxy-polyamide paints designed to protect surfaces from environmental attack.

Aliases MIL-DTL-24441(SH), MIL DTL 24441(SH), MIL-DTL-24441, MIL DTL 24441C, MIL-P-24441B, MIL P 24441B, MIL-P-24441, MIL P 24441

TYPE III

Type III – Three-coat system for use where air pollution regulations restrict volatile organic compound (VOC) content to less than 340 grams per liter (2.8 pounds per gallon) of paint.

Type IV (2 coat system)

MIL-PRF-24635E COATING SYSTEMS, WEATHER RESISTANT, EXTERIOR USE (Silicone Alkyd Paint)

Dated September 15, 2009. QPD/QPL-24635-17 May 13, 2008

Aliases MIL-PRF-24635, 24635, Milspec 24635

The 24635 specification establishes the performance requirements for weather-resistant coating systems for use on primed, smooth metal, glass reinforced plastic (GRP), wood and plastic/composite exterior surfaces. Available in most colors under Federal Standard 595B. All Grade A, Standard Pigmented.

TYPE II = Standard Durability coatings with VOC not greater than 340 g/L or 2.8 lb/gal.

TYPE III = Standard Durability coatings with VOC not greater than 250 g/L or 2.08 lb/gal.

• CLASS 1 = High gloss, 85
• CLASS 2 = Semigloss, 45 to 60
• CLASS 3 = Low gloss, 7 to 12

Type II (340 g/L VOC) – Class 1 – Gloss

Grade A, Standard pigmented only. Colors are from Fed STD 595.

Type II (340 g/L VOC) – Class 2 – Semigloss

Grade A, Standard pigmented only. Colors are from Fed STD 595.

Type II (340 g/L VOC) – Class 3 – Low gloss

Grade A, Standard pigmented only. Colors are from Fed STD 595.

Type III (250 g/L VOC) – Class 1 – Gloss

Grade A, Standard pigmented only. Colors are from Fed STD 595.

Type III (250 g/L VOC) – Class 2 – Semigloss

Grade A, Standard pigmented only. Colors are from Fed STD 595.

Type III (250 g/L VOC) – Class 3 – Low gloss

Grade A, Standard pigmented only. Colors are from Fed STD 595.

MIL-DTL-24607B ENAMEL, INTERIOR, NONFLAMING (DRY), CHLORINATED ALKYD RESIN, SEMIGLOSS (Chlorinated Alkyd Paint)

Dated October 23, 2008.

Aliases: TPD-24607, DOD-E-24607

The 24607 specification covers a semigloss, chlorinated alkyd resin, interior enamel that does not support combustion or flaming when dry, and is for use on primed, smooth metal, glass reinforced plastic (GRP), wood and plastic/composite surfaces.

TPD-1000A PAINT, ALUMINUM, HEAT RESISTING (Aluminum Paint)

Dated December 14, 1994.

Technical Procurement Description TPD-1000A is related to TT-P-28H PAINT, ALUMINUM, HEAT RESISTING.

This specification covers aluminum pigmented, heat resisting paint that will withstand solvents and elevated temperatures. (538°C [1000°F]) ALUMINUM #17178

• 1 gallon – NSN 8010-01-344-5119 (8010013445119)
• 5 gallons – NSN 8010-01-344-5120 (8010013445120)

See prices or request a quote.

TT-P-645B(SH) PRIMER, PAINT, ZINC-MOLYBDATE, ALKYD TYPE (Ship Primer)

Dated December 14, 1994

Color: YELLOW #33793

This specification covers a 2.8 pound per gallon (340 gram/liter) volatile organic content (VOC) complying, zinc-molybdate paint for use as a general primer for applications to steel and aluminum.

• 1 gallon – NSN 8010-01-285-1329 (8010012851329)
• 5 gallons – NSN 8010-01-285-1328 (8010012851328)

See prices or request a quote.